Search Results

It is essential to note that cybersecurity threats not only arise from inherent protocol defects but also consider software implementation vulnerabilities.

While current cybersecurity endeavors in the heavy-duty (HD) vehicle space focus on securing conventional communication technologies such as the controller area network (CAN), there is a notable deficiency in defensive research concerning legacy technologies, particularly those utilized between trucks and trailers. ...To the best of current knowledge, this publication marks the first presentation of cybersecurity defense research on the SAE J1708/J1587 protocol stack.

Since the early 1990’s, commercial vehicles have suffered from repeated vulnerability exploitations that resulted in a need for improved automotive cybersecurity. This paper outlines the strategies and challenges of implementing an automotive Zero Trust Architecture (ZTA) to secure intra-vehicle networks. ...This research successfully met the four requirements and demonstrated that using ZT principles in an on-vehicle network greatly improved the cybersecurity posture with manageable impact to system performance and deployment.

UNECE R155 explicitly references ISO/SAE 21434 and mandates a certified cybersecurity management system (CSMS) as a prerequisite for automotive manufacturers to achieve vehicle type approval and sell new vehicle types. ...However, the gap in the CSMS framework is a lack in a standardized system that provides guidance and common criteria for automakers to measure a vehicle’s level of compliance and compute a publicly accepted cybersecurity rating. To help establish increased consumer confidence, OEMs and smart mobility stakeholders could take additional proactive steps to ensure the safety and security of their products. ...This paper addresses the above requirement and discusses the cybersecurity rating framework (CSRF) that could establish a framework for rating vehicle cybersecurity by standardizing the measurement criteria, parameter vectors, process, and tools.

This paper gives a definition of the SDV concept, provides views from different aspects, discusses the progress in vehicle E/E architecture, especially zone-based architecture with centralized computation, and various technologies including High-Performance Computing (HPC) platform, standardized vehicle software architecture, advanced onboard communication, Over-The-Air (OTA) update, and cybersecurity etc. that collectively enable the realization of SDV.

Certified Machine Learning-Based Avionics: Unlocking Safer Revolutionizing Electronic Warfare: Unleashing the Power of High-Performance Software Defined Radios Deterministic and Modular Architecture for Embedded Vehicle Systems Approximating the Material Stresses and System Requirements for Hypersonic Flight Design Approaches for Established and Emerging RF Receiver Architectures Rydberg Technologies Shows Potential of Long-Range RF with Quantum Sensor at NetModX23 New Method to Measure Wind Speed Could Unlock Drones' Potential A fundamentally different approach to wind estimation using unmanned aircraft than the vast majority of existing methods. This method uses no on-board flow sensor and does not attempt to estimate thrust or drag forces. Report on Human Factors Issues Likely to Affect Air-Launched Effects This report reviews human factors research on the supervision of multiple unmanned vehicles (UVs) as it affects human integration with Air-Launched Effects (ALE).

The article also focus on innovative approaches that have recently adopted my many cybersecurity professionals for secured operation of ITS involving block-chain, artificial intelligence, and Machine Learning.

Abstract In the pursuit of advancing autonomous vehicles (AVs), data-driven algorithms have become pivotal in replacing human perception and decision-making. While deep neural networks (DNNs) hold promise for perception tasks, the potential for catastrophic consequences due to algorithmic flaws is concerning. A well-known incident in 2016, involving a Tesla autopilot misidentifying a white truck as a cloud, underscores the risks and security vulnerabilities. In this article, we present a novel threat model and risk assessment (TARA) analysis on AV data storage, delving into potential threats and damage scenarios. Specifically, we focus on DNN parameter manipulation attacks, evaluating their impact on three distinct algorithms for traffic sign classification and lane assist.

The purpose of this SAE Aerospace Information Report (AIR) is to provide guidance for aircraft engine and propeller systems (hereafter referred to as propulsion systems) certification for cybersecurity. Compliance for cybersecurity requires that the engine control, propeller control, monitoring system, and all auxiliary equipment systems and networks associated with the propulsion system (such as nacelle systems, overspeed governors, and thrust reversers) be protected from intentional unauthorized electronic interactions (IUEI) that may result in an adverse effect on the safety of the propulsion system or the airplane.

Abstract The secure boot has successfully protected systems from executing untrusted software (SW), but low-power controllers lack sufficient time to check every memory cell while satisfying real-time functional safety requirements. Automotive controllers need to maintain security through multiple cycles of remote, unsupervised operation and safely reach a secure state when an anomaly is detected. To accelerate the boot time, we propose Sliced Secure Boot: build fingerprints by slicing orthogonally through memory blocks, protect each cell with a reusable fingerprint using a reproducible pattern with sufficient entropy, and randomly check one fingerprint pattern during boot. We do not claim that sampling offers equivalent protection to exhaustive checks but demonstrate that careful sampling can provide a sufficient level of detection while maintaining compatibility with both startup time and functional safety requirements.

The new generation vehicles these days are managed by networked controllers. A large portion of the networks is planned with more security which has recently roused researchers to exhibit various attacks against the system. This paper talks about the liabilities of the Controller Area Network (CAN) inside In-vehicle communication protocol and a few potentials that could take due advantage of it. Moreover, this paper presents a few security measures proposed in the present examination status to defeat the attacks. In any case, the fundamental objective of this paper is to feature a comprehensive methodology known as Intrusion Detection System (IDS), which has been a significant device in getting network data in systems over many years. To the best of our insight, there is no recorded writing on a through outline of IDS execution explicitly in the CAN transport network system.

Using a wireless medium for tractor-trailer communication will bring new cybersecurity challenges and requirements which requires new development and lifecycle considerations.

CAN bus network proved to be efficient and dynamic for small compact cars as well as heavy-duty vehicles (HDV). However, HDVs are more susceptible to malicious attacks due to lack of security in their intra-vehicle communication protocols. SAE proposed a new standard named J1939-91C for CAN-FD networks which provides methods for establishing trust and securing mutual messages with optional encryption. J1939-91C ensures message authenticity, integrity, and confidentiality by implementing complex cryptographic operations including hash functions and random key generation. In this paper, the three main phases of J1939-91C, i.e., Network Formation, Rekeying, and Message Exchange, are simulated and tested on Electronic Control Units (ECUs) supporting CAN-FD network. Numerous test vectors were generated and validated to support SAE J1939-91C. The mentioned vectors were produced by simulating different encryption and hashing algorithms with variable message and key lengths.

Cybersecurity (CS) is crucial and significantly important in every product that is connected to the network/internet. ...Hence making it very important to guarantee that every single connected device shall have cybersecurity measures implemented to ensure the safety of the entire system. Looking into the forecasted worldwide growth in the electric vehicles (EV’s) segment, CS researchers have recently identified several vulnerabilities that exist in EV’s, electric vehicle supply equipment (EVSE) devices, communications to EVs, and upstream services, such as EVSE vendor cloud services, third party systems, and grid operators. ...Additional processes have been defined in the process reference and assessment model for the CS engineering in order to incorporate the cybersecurity related processes in the ASPICE scope. This paper aims at providing a model & brief overview to establish a correlation between the ASPICE, ISO/SAE 21434 and the ISO 26262 functional safety (FS) standards for development of a secured cybersecurity software with all the considerations that an organization can undertake.

This standard sets forth the desired characteristics of a second-generation aviation Ku-band and Ka-band satellite communication (satcom) system intended for installation in all types of aircraft.

eAxles gain traction OEMs are developing and testing axles with integrated electric powertrains to electrify trucks of all sizes. Securing CAN networks in commercial vehicles A CAN transceiver with built-in security functions can avoid the complexity of end-to-end security solutions that are especially hard to implement on CVs. Electrification is the future for defense vehicles Despite infrastructure challenges, electrified and automated military vehicles will save fuel and lives, said Allison's VP of Defense Programs at SAE COMVEC 2022. Editorial Hiring talent to meet high-tech demands Allison's now open for hydrogen testing Electrification's impact on commercial-vehicle chassis design Harbinger prepares to enter commercial market with novel eAxle ZF, Freudenberg developing integrated 'Powerpack' fuel cell and e-drive Freightliner's medium-duty makeover for M2 and SD models Toyota's hydrogen fuel-cell powertrain provides an electrifying ride

This document describes a set of recommended actions to take to increase the likelihood of safe vehicle operation when a device (external test equipment, data collection device, etc.) whose normal operation has been compromised by a source external to the vehicle is connected to the vehicle’s diagnostic system. The term “diagnostic system” is intended to be a generic way to reference all the different ways that diagnostic commands might be injected into the system. The guidance in this document is intended to improve security without significantly impacting the ability for franchised dealer or independent aftermarket external test tools to perform legitimate diagnosis and maintenance functions. The goal is that intrusive services are only allowed to be performed when the vehicle is in a Safe State such that even if the intrusive service were to be initiated with adversarial intent the consequences of such a service would still be acceptable.

The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA.